Hello,
I successfully installed ESXI 5.1.0 on a DELL Poweredge T620.
Then I need to access VSphere server from a VSphere client...
but I cannot connect the VSphere server to my local network and it seems the problem
has to do with the network adapters.
From VSphere server interface I go to Management Network -> Network Adapters :
I find two adapters, one of which is checked:
(checked) - Embedded NIC 1 (MAC address) status: Disconnected
- Embedded NIC 2 (MAC address) status: Disconnected
( no light on the RJ45 plug when using "Test Management Network" option to ping the gateway... )
I went through devices BIOS menu and found some information but I don't really understand:
here is a sample for device Intel Gigabit 2P i350 -t LOM:
- Firmware image properties : Family version 13.5.6
- Legacy boot protocol: PXE
- Link speed: AutoNeg (I tried to change to 10 MB - Half (router configuration) but no effect)
- Wake on LAN: Disabled
=> Port Configuration Information: (cannot be changed)
- UEFI Driver: intel PRO/1000 5.0.08
- Adpater PBA: 105600-000
- Chip type: intel i350
- PCI Device ID: 1521
- PCI Bus:Device:Function: 6:0:0
- Link status: Disconnected
I Don't know how to proceed to solve this problem, and I cannot find some documentation onIntel Gigabit 2P i350 -t LOM,
has someone an idea?
Thanks