vtep end points not pinging
HiI have 2 vtep end points, configuration is as follows: server-1esxivtep1-10.0.0.100/24 server-2esxivtep2-20.0.0.200/24 server-1 --> switch-1 --> routerserver-2 --> switch-2 --> router...
View Articlevxlan end points not pinging
HiI have 2 vtep end points, configuration is as follows: server-1esxivtep1-10.0.0.100/24 server-2esxivtep2-20.0.0.200/24 server-1 --> switch-1 --> routerserver-2 --> switch-2 --> router...
View ArticleRe: ESXi Crash - No PSOD
Thanks for your help mpx.vmhba0:C0:T0:L0 is showing as the CD-ROM drive and is showing as mounted, however the CD-ROM drive is not being used by any VMs. No BIOS/firmware/drivers/patch updates have...
View ArticleRe: ESXi 5.1: vmsvc warning guestinfo RecordRoutingInfo: Unable to collect...
Ran into this as well today with CentOS Minimal 6.3 on vCD 5.1. Looking into it myself. Never seen this one before.
View ArticleRe: ESXi Management not working Cisco LAG
ZFSRocks wrote: Okay, so I was just reading through the setup on VSA and realized it was going to do a bunch of setup for me. This isn't a brownfield install because it is a fresh cluster, however, I...
View Articlevxlan and internal interface from vm
I have 2 VMs (VM1, VM2) on a ESXi server-1. I want to have these 2 VMs talking so i have created one vnic on each and connected using same port-group and gave them subnet, say192.168.0.0./24. Its...
View ArticleMonitoring Adaptec 2405 RAID card on esxi 5.1
Hi, I got an esxi 5.1 server running with an Adaptec 2405 RAID card. Everything work well, except I can't seem to be able to monitor the RAID/Array condition. Meaning, under the status/health pages I...
View ArticleRe: ESXi 5.1: vmsvc warning guestinfo RecordRoutingInfo: Unable to collect...
I've not been able to re-produce this again but the process I followed to build new was: Install CentOS 6.3 from ISO configure network install VMware tools cloned and customized to test captured to...
View ArticleRe: How to know when to Stop putting VMs on ESXi Hosts based on CPU usage
My experience tells me you're going to run into memory issues waaaaaay before CPU.
View ArticleCan esxi 5.1 open vmdk from workstation 8?
Hello, I am new to VMware, I just downloaded VMware vCenter Converter Standalone Client and convert one of our physical machine to vmware workstation 8.x vmdk files. We plan to install esxi 5.1 on this...
View ArticleRe: ESXi 5.1.0 usb pci-passthrough does not work
Have you opened a bug with VMware about this? Looking at the release notes it appears a pass-through bug (kb.vmware.com/kb/2035777) was addressed in the patch you mentioned. I would grab a vm-support...
View ArticleRe: Can esxi 5.1 open vmdk from workstation 8?
Hello and welcome to the communities. You can export the VM from Workstation to OVF or run Converter again or.... There are many options here. You will be fine!
View ArticleRe: Can esxi 5.1 open vmdk from workstation 8?
Thanks for your reply, what do you mean run Converter again? whcih option I should choose? when I choose powered-on machine, it gave me 2 options. 1 VMware infrastructure virtual machine 2 Vmware...
View ArticleRe: Can esxi 5.1 open vmdk from workstation 8?
You would power the VM down and then choose "VMware Workstation or other VMware virtual machine" from the pull-down menu for the source type selection in Converter.
View ArticleRe: Mixed Cluster 4.1/5.1 & Cisco Nexus 5020 in the mix; strange vmotion...
Mismatched MTU sizes are known to cause issues (as outlined in 2036890). Have you verified that the MTU issue on the 5020 is really cosmetic? Have you tried a vmkping with a jumbo packet to ensure (see...
View ArticleClik here to view.
Re: ESXi5.1 / vSphere Client: "Unable to connect to the MKS:"
Still no solution: created new certificateshost reboot -> new certificat is shown when connecting to vSphere Client BUT: Still impossible to connect to client consoles Klaus
View ArticleRe: Can esxi 5.1 open vmdk from workstation 8?
Hello, I will describe it here. this is an physical server, and it's not a VM. Our plan is install esxi on this server and then run the OS on the VM, so we need to backup the machine first. I googled...
View ArticleRe: High CPU load when network is busy
Hard to say. Typically network and CPU utilization are related so the higher the throughput the higher the CPU utilization. Server/Enterprise grade network cards allow offloading capabilities that...
View ArticleRe: Can esxi 5.1 open vmdk from workstation 8?
Yes. (1) Convert would first be run against the powered-on physical server to create a VMware Workstation-ready virtual machine as a set of flat files (.VMDK, .VMX, etc). (2) Install Workstation or...
View ArticlelibhgfsServer.so and libvix.so failed to load on sles11sp2
Hi, I've just upgraded an enviroment to esxi5.1 with all the updates and upgraded the hardware profile. But now i'm getting :Starting HAL daemonvmsvc[1458]: [ warning] [vmtoolsd] Opening plugin...
View Article