Re: vmware tools under osx 10.8 keeps crashing on esxi 5.1
Are there any relevant crash reports in /Library/Logs/DiagnosticReports after VMware Tools has crashed? If so, could someone post them? Thanks,--Darius
View ArticleRe: Detected Tx Unit Hang
I've might have been a bit to fast on my previous comment... sorry about this. Your screenshot seems to be taken of a guest VM running a *nix based OS and not the ESXi host.. Is this the case?The...
View ArticleClik here to view.
Re: How To Export the VM's List with the Folder Name which they are in ??
Thanks Dave ... I am not that good in CLI , i will try with this.
View ArticleClik here to view.
Re: How To Export the VM's List with the Folder Name which they are in ??
Thank You..... Alim. It didnt give the result what i was looking for , but great tool which i was not aware. Thank You for that
View ArticleRe: Guest IP address is not showing up on a vSphere Summary page with VMware...
MAC address on the machine is: 0050569c2be0Header belongs to VMware.
View ArticleRe: Guest IP address is not showing up on a vSphere Summary page with VMware...
I have installed Centos 5.8 without X Windows. This time I configured networking before installing VMware tools. IP address and hos info showed up.I have a Centos 5.4 running. Did same sequence and it...
View ArticleRe: Time out issue
Hey Brian, I replied to your question and thanks for your help. This one has got me stumped. Jeff
View ArticleWill EVC Work for these 2 Family Intel(R) Xeon(R) CPU L5410@ 2.33 GHZ AND...
HI Experts , Will EVC Work for these 2 Family Intel(R) Xeon(R) CPU L5410@ 2.33 GHZ AND Intel(R) Xeon(R) CPU E5620@ 2.33 GHZ Not able to check in Compatibility Guide Please help not able to do Vmotion
View Articlevsish -e set /vmkModules/iso9660/mount $(esxcfg-mpath -b | grep "CD-ROM" |...
I am attempting to perform the following mount on a on the new MAC Mini Superdrive " vsish -e set /vmkmodules/iso9660/mount $ (esxcfg-mpath -b | grep "CD-ROM" | awk '{print $1}') and getting the...
View ArticleRe: Will EVC Work for these 2 Family Intel(R) Xeon(R) CPU L5410@ 2.33 GHZ AND...
Is dell precision Supported for Esxi 5.0
View ArticleRe: vsish -e set /vmkModules/iso9660/mount $(esxcfg-mpath -b | grep "CD-ROM"...
I was able to confirm and review command.
View ArticleRe: Will EVC Work for these 2 Family Intel(R) Xeon(R) CPU L5410@ 2.33 GHZ AND...
Workstation class machines are not typically certified by VMware or the applicable hardware vendor. EVC should still work OK. You'll be limited to L1 - Intel Penryn due to the L5410 processor. When...
View ArticleProblem with ESXi command "vsish -e set /vmkModules/iso9660/mount...
vsish -e set /vmkModules/iso9660/mount $(esxcfg-mpath -b | grep "CD-ROM" | awk '{print $1}')I am attempting to perform the following mount on a on the new MAC Mini Superdrive " vsish -e set...
View ArticleWe have VMs on one of our clusters that are showing alarms, but when you...
We have VMs on one of our clusters that are showing alarms, but when you click on the Alarms or Tasks and Events tabs there are no corresponding alerts.
View ArticleVM's were storage vMotioned to another data store, and now I have 3 VM's with...
VM's were storage vMotioned to another data store, and now I have 3 VM's with white "!" inside a red square, and I want to figure out the cause of this.
View ArticleRe: Brocade 825
Hey Guys, Same issue here. Apparently Update Manager does NOT install these Drivers. I tried it and no go. You have to use the Tar.gz download and CLI into the host to unzip and then run the .sh...
View ArticleRe: VM's were storage vMotioned to another data store, and now I have 3 VM's...
Look at the Alarms tab for the datacenter or cluster - somewhere higher up than the VMs, if the VM Alarms tab is not showing anything. Also check the datastores individual Alarm tabs.
View ArticleRe: We have VMs on one of our clusters that are showing alarms, but when you...
Is this the same issue reported in your other discussion? http://communities.vmware.com/thread/437321
View ArticleWhat filesystem is mounted as / during firstboot?
Hi, i am trying to do various bits of automation during the firstboot section of a scripted ESXi5.0 installation and while most stuff is working, I am having trouble debugging steps that aren't. I try...
View Article