Re: vmxnet3 and MTU 4500
You should be able to set the a specific MTU independently from the options offered in the device drivers properties via netsh as described...
View ArticleRe: ESXi 5.1 host accepts no network connetctions
I don't know if Supermicro and DELL is using the same components, but I had issues with a DELL M420 using the vanilla ISO from Vmware, DELL support advised us to try their own custom ISO and it worked...
View ArticleRe: vSphere 5.1 Replication
There is my short list of VMware vSphere Replication limitations. It’s more like a comparison with 3-party products rather than with array-based replication. Nevertheless, I hope you’ll find this...
View ArticleRe: vSphere client remembers sessions
Hi... Try to look in the registry under the key HKCU\Software\VMware\VMware Infrastructure Client\Preferences. In there is a string with the name of "Recent Connections". This seems to hold the...
View ArticleClik here to view.
Re: ESXi 5, Link Bundling, VLANs, and Management Interface
jasonvp wrote: Rickard Nobel wrote: You can not have your two vmnics (physical NIC ports) connected to two vSwitches and at the same time have any "teaming". You will have to remove one of the...
View ArticleRe: vmxnet3 and MTU 4500
rayvd wrote: Any way to adjust this to 4500? Would 9000 work and just auto-drop down to 4500 at the TCP/IP level thanks to MSS? If the remote side supports only 4500 then this will be negotiated for...
View ArticleRe: Monitor Raid Status in vSphere Client
Sorry to hear that.... It was worth a shot..Have you tried asking Adaptec about what you have to do/install to get the CIM providers to display the needed info.. ? /Rubeck
View ArticleRe: Ballooning Memory
Ranjna Aggarwal wrote: is there any kb article on this or any vmware document that defines it clearly. What do you specific want to know about this? The key point is that the vmkernel has no way of...
View ArticleRe: GuestAppMonitor SDK API in vmware tools in vSphere 5.1
Ranjna Aggarwal wrote: How to test this inGuestAppMonitor SDK API in vmware tools in vSphere 5.1 VM? What do you want to really test? The SDK is for application developers and I belive it could be...
View ArticleRe: Trouble with presenting replicated LUNs in ESXi 5.0
Hi, As A.P said, if these two cluster in same vCenter server , then it will not allow it to mount. For testing , from DR site, put one host in maitenance mode and take it out from cluster . Once it is...
View ArticleNeed help with QLE220 HBAs urgently
Hi all. I have 3 Dell R810 servers with QLE220 HBAs.The problem with the HBAs is that the ESXi 5.1 cannot recognize them.The first thing you'll answer is that those HBAs are not officially on the HCL,...
View Articlecpu1:4156 WARNING: PageRetire: 659: Number of user private MPNs selected for...
Hello All, I am starting to see some MPN warnings in my vmkwarning.log on one of my hosts. Has anyone else experienced these; I am thinking it could translate into a bad memory chip or some hardware...
View ArticleRe: Need help with QLE220 HBAs urgently
What's the exact HBA model name? "QLE220" may be the chip name by qlogic but not the real model name of a dell branded HBA, which might is listed on the HCL after all.However in the process I seem to...
View ArticleRe: Multiple Gateways
Hi All, I am able to access the iscsi disks now . The issue was with the access list created in the cisco switch . thanks!!... Notes:No need to add the additional gateway to the HOSTsEven if we have...
View ArticleRe: Need help with QLE220 HBAs urgently
Hi, thank you for the quick reply! So the lspci -v command identifies the 2 devices as: 00:06:00.0 Fibre Channel Serial bus controller: QLogic Corp SP232-based 4Gb Fibre Channel to PCI Express HBA...
View ArticleRe: Dll Error -
Hi , Tired both but no Luck ... Error msg after the registration : The module "vmtools.dll" was loaded but the entry-point DLL Register server was not found. Make sure "VMtools.dll" is a vaild DLL or...
View ArticleRe: Dll Error -
I had upgraded the hardware first and then the tools . Same procedure was carried about for all the VM in the farm .But only this machine has issues . Could you please let me know why it is suggested...
View ArticleRe: Need help with QLE220 HBAs urgently
Actually, scratch that with the tar command. I just found out the hard way that this not a standard tar format (seriously VMware?):http://communities.vmware.com/thread/217233 So you need a step in...
View ArticleRe: vSphere 5 - Host Hardware Voltage IBM Blades
Yep, looks like it got pulled for the HS22(V) systems. It is there for the HX5 still with a January 8, 2013 posting date....odd. No XML file though.
View Article